ToughCable PRO Pre-Terminated 25CM
Shipping: Calculated at Checkout
Volume Discounts: Applied at Checkout SAVE!
SAME DAY SHIPPING FOR ORDERS BEFORE 2PM WEEKDAYS*
Outdoor Shielded Ethernet Patch Cable Pre-Terminated
NOTE: Available in lengths up to 5M. For lengths above 5M please select TC-PRO-BTM here.
Protect your networks from the most brutal environments with Ubiquiti’s industrial-grade shielded Ethernet cable, TOUGHCable™.A Category 5e, outdoor, carrier-class shielded cable with an integrated ESD drain wire. TOUGHCable PRO Pre-terminated.
Designed for the purchase of small pre-terminated shielded patch cables for use with Ubiquiti products. For lengths longer than 10 meter please choose Tough Cable Pro By The Meter (BTM) and add 2 x Tough Connectors per cable if termination is required. Ideal for the smaller applications where a full 304m box is not required. TOUGH Cable Connectors are also available in 10 Packs.
Dramatically improve your Ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables.
TOUGHCables have been built to perform even in the harshest weather and environments.
ESD Damage Protection
Protect your networks from devastating electrostatic discharge (ESD) attacks.
Extended Cable Support
TOUGHCables have been developed to increase power handling performance for extended cable run lengths.
- 24 AWG copper conductor pairs
- 26 AWG integrated ESD drain wire to prevent ESD attacks and damage
- PE outdoor-rated, weatherproof jacket
- Multi-layered shielding
- Available in lengths of 1000 ft (304.8 m)
ToughCable Pro Pre-Terminated Lengths
1 x TOUGHCable available in the following lengths
ToughCable Pro - Specifications
|Ethernet Support||Up to 1 Gbps|
|Conductor Wire Gauge||24 AWG|
|Conductor||Solid Bare Copper|
|Conductor Diameter||0.500 ± 0.005 mm|
|Insulation Type||Solid PE|
|Insulation Thickness||Avg. 0.26 mm, Min. 0.25 mm|
|Insulation Diameter||1.04 ± 0.03 mm|
|Separation (Polyester Wrapping)||Thick: 0.025 mm, Extent: 20 mm|
|Cable Shield (Aluminum Foil)||Thick: 0.060 mm, Extent: 18 mm|
|ESD Drain Wire||0.4 CCS|
|Jacket Thickness||Avg. 0.50 mm, Min. 0.46 mm|
|Jacket Outer Diameter||6.0 ± 0.30 mm|
|Reference Standard||ISO/IEC 11801, TIA/EIA568B.2|
|Unit Of Measure||ea|
Others Also Bought
More From This Category