Shipping: Calculated at Checkout
Volume Discounts: Applied at Checkout SAVE!
SAME DAY SHIPPING FOR ORDERS BEFORE 2PM WEEKDAYS*
Optical Data Transport for Outdoor POE Devices
Ubiquiti F-POE-G2 FiberPoE Fiber + Power Solution for Outdoor PoE Device
Overcome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection.
Separate Data and Power Transport
PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs. The FiberPoE Gen 2 provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE Gen 2 device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE Gen 2 devices to create a Fiber Bridge.
Enhanced Surge Protection
Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the FiberPoE Gen 2 delivers enhanced surge protection. The added GDT support effectively protects against lightning and other power surges.
Fiber Optic Data Transport
Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable. The FiberPoE Gen 2 supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.
Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.
Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.
Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
- 1 x FiberPOE Gen2
- 1 x Self-Tapping Screw
- 2 x Metal Straps
- Quick Start Guide
FiberPOE Gen2 - Specifications
|Dimensions||196.4 x 93.5 x 32.4 mm
( 7.73 x 3.68 x 1.28")
|Weight||288 g (10.2 oz)|
|Interface Connections||(1) 1 Gbps SFP Port
(1) DC Terminal Block
(1) DC RJ45 Port DC Injection
(1) 1000 Mbps Ethernet PoE Port1
|Typical Power Consumption||1.5W|
|Power Method||DC Terminal Block, 2-Wire, 24VDC or 50VDC
DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or
4-Pair (24VDC or 50VDC Input) Passthrough
PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or
4-Pair (24VDC or 50VDC Input) PoE Passthrough
|PoE Output||PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or
4-Pair (24VDC or 50VDC) PoE
|DC Output||Terminal Block, 2-Wire (24VDC or 50VDC)|
|Input DC Voltage||16 to 57V|
|Surge Protection||Built-In High-Current Gas Discharge Tube
for DC Terminal Block and PoE Port
|LED||White: Power On
Blue (Flashing): Activity
|Operating Temperature/td>||40 to 60° C2
(-40 to 140° F)
|Operating Humidity||10 to 95% Noncondensing|
|ESD/EMP Protection||± 24kV Contact / Air for Ethernet|
|Certifications||CE, FCC, IC|
110/100 Mbps Ethernet not supported.
2 May be further restricted by the operating temperature range of the SFP module being used.
|Unit Of Measure||ea|
Others Also Bought