Buy Toughcable Pro By The Meter BTM Online in Australia
Shipping: Calculated at Checkout
Volume Discounts: Applied at Checkout SAVE!
SAME DAY SHIPPING FOR ORDERS BEFORE 2PM WEEKDAYS*
Customise Your Purchase
Enter the Required Length of Your Cable in Meters
Pre-Terminate 2 x RJ45 Shielded Connectors to your cable.
Outdoor Shielded Ethernet Cable By The Meter (BTM). Minimum 10M Length.
NOTE: Minimum 10M lengths when purchasing this item. For shorter length cables select the TC-PRO-PT here
Protect your networks from the most brutal environments with Ubiquiti’s industrial-grade shielded Ethernet cable, TOUGHCable™. A Category 5e, outdoor, carrier-class shielded cable with an integrated ESD drain wire. TOUGHCable PRO By The Meter (BTM) is cut to length, ideal for the smaller applications where a full 304m box is not required. TOUGH Cable Connectors are also available in box of 100 or 10 Packs for smaller applications.
Dramatically improve your Ethernet link states, speeds, and overall performance with Ubiquiti TOUGHCables.
TOUGHCables have been built to perform even in the harshest weather and environments.
ESD Damage Protection
Protect your networks from devastating electrostatic discharge (ESD) attacks.
Extended Cable Support
TOUGHCables have been developed to increase power handling performance for extended cable run lengths.
- 24 AWG copper conductor pairs
- 26 AWG integrated ESD drain wire to prevent ESD attacks and damage
- PE outdoor-rated, weatherproof jacket
- Multi-layered shielding
- Available in lengths of 1000 ft (304.8 m)
1 x TOUGHCable PRO 3 ft (1m)
ToughCable Pro - Specifications
|Ethernet Support||Up to 1 Gbps|
|Conductor Wire Gauge||24 AWG|
|Conductor||Solid Bare Copper|
|Conductor Diameter||0.500 ± 0.005 mm|
|Insulation Type||Solid PE|
|Insulation Thickness||Avg. 0.26 mm, Min. 0.25 mm|
|Insulation Diameter||1.04 ± 0.03 mm|
|Separation (Polyester Wrapping)||Thick: 0.025 mm, Extent: 20 mm|
|Cable Shield (Aluminum Foil)||Thick: 0.060 mm, Extent: 18 mm|
|ESD Drain Wire||0.4 CCS|
|Jacket Thickness||Avg. 0.50 mm, Min. 0.46 mm|
|Jacket Outer Diameter||6.0 ± 0.30 mm|
|Reference Standard||ISO/IEC 11801, TIA/EIA568B.2|
|Unit Of Measure||m|
We Also Recommend
Others Also Bought