UniFi Building-to-Building Bridge 60 GHz Gigabit+ Wireless Bridge Kit

 

60 GHz PtP link using 802.11ad with 5 GHz radio for backup. Ideal for high-throughput connectivity with a range of up to 500 m.

 

The UniFi Building-to-Building Bridge, model UBB, is the ideal solution for high-throughput connectivity with a range of up to 500 m. Integration with the UniFi Controller makes bridging two networks seamless. Comprised of two pre-paired endpoint devices, the UBB delivers a Point-to-Point (PtP) link – up to 1.7+ Gbps bi-directional – using 802.11ad technology on the low-interference 60 GHz radio band. For backup, a 5 GHz radio using 802.11ac technology is available.

60 GHz Operating Frequency
The 60 GHz band attenuates quickly due to atmospheric absorption. When a 60 GHz radio – such as the UBB – uses a highly directional antenna, interference from other directions is also attenuated. The 60 GHz band thus offers extremely high transmission capacity as a wireless wire.

Wireless Link Redundancy
60 GHz is highly directional and any obstacle in the line of sight – even rain – can drop signal levels. To maintain connectivity, the UBB can fail over to the 5 GHz radio. The 5 GHz radio band propagates better and uses radio wave reflections and refraction's more effectively, although it offers lower maximum throughput.

Pre-Paired Configuration
Setup is quick and easy: the UBB radios are pre-paired out of the box so you can use the UniFi app for simultaneous adoption. The UniFi Controller software enables intuitive management of individual UniFi devices and site-wide deployments.

Sleek Industrial Design
The UBB is designed with a compact form factor for discreet integration into any environment.

Convenient Alignment The UBB pivots on its ball joint 3-axis mount for easy aiming.

Mounting Versatility
No fasteners are required for pole-mounting, and a single wall fastener (not included) is required for wall-mounting. A wall mount kit, model NBE-WMK, is available as an optional accessory to enhance stability

 

 

(UBB)

UniFi Building-to-Building Bridge

Pack Includes:

  • UniFi Building-to-Building Bridge (x2)
  • Ball joint mount (x2)
  • Lock ring (x2)
  • Metal strap (x2)
  • Gigabit PoE (48V, 0.32A) with mounting bracket (x2)
  • Power cord (x2)
  • Quick Start Guide

UniFi Building-to-Building Bridge - Specifications

UBB RADIO
Dimensions 140 x 140 x 90 mm (5.51 x 5.51 x 3.54")
Weight 376 g (13.3 oz)
Antenna Gain
2.4 GHz (BLE)
5 GHz
60 GHz


2 dBi
10 dBi 17.2 dBi
GPS Yes
Max. TX Power 25 dBm (5 GHz)
Interfaces
Networking
Management

(1) 10/100/1000 Ethernet Port
Bluetooth
Enclosure UV-Resistant Polycarbonate
  Power Method 802.3af Supported
Passive Power over Ethernet (48V)
Power Supply UniFi PoE Switch
48V, 0.32A Gigabit PoE Adapter (Included)
Max Power Consumption 11W
Wind Loading 56 N @ 200 km/h (12.6 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph)
Mounting Pole-Mount (Kit Included)
Wall-Mount (Not Included)
ESD/EMP Protection ± 24kV Contact/Air
Operating Temperature -40 to 70° C (-40 to 158° F)
Operating Humidity 5 to 95% Noncondensing
Certifications CE, FCC, IC
OPERATING FREQUENCY (MHZ)
Worldwide 5150 - 5875
57,000 - 66,000
US/CA U-NII-1: 5150 - 5250
U-NII-3: 5725 - 5850
57,000 - 66,000
BLUETOOTH (MHZ)
Worldwide 2400 - 2483.5

Shipping Specifications

SKU UBB
Model # UBB
Barcode # 8.18E+11
Brand Ubiquiti
Shipping Weight 0.4000kg
Shipping Width 0.140m
Shipping Height 0.090m
Shipping Length 0.140m
Shipping Cubic 0.001764000m3
Unit Of Measure ea

UniFi Building-to-Building Bridge - Documents

Be The First To Review This Product!

Help other UBNT Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category