Enterprise Access Hub 8.


The UniFi Access Hub comes with versatile interfaces, including support for most electric bolts/strikes, magnetic locks, and 12V access accessories such as motion sensors, push buttons, and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access application. Easily manage users, visitors, schedules, and access policies with the with the intuitive browser-based interface.

•(8) Lock terminals (12V or Dry)
•(8+8) Inputs for request-to-exit devices and door position sensors
•(8) PoE ports for Access Readers
•(4) AUX terminals for chimes, sirens, or door openers
•(1) Battery backup input (32–48V)
•(1) DC input for backup power


UniFi Enterprise Access Hub


Enterprise Access Hub 8

Pack Includes:

  • 1x Enterprise Access Hub
  • Quick Start Guide


UniFi Enterprise Access Hub 8 Contents

Enterprise Access Hub 8 - Specifications


Dimensions 379 x 355 x 105 mm (15 x 14 x 4.1")
Weight Device: 9.1 kg (20 lb)
Mount: 624 g (1.4 lb)
Enclosure material SGCC housing with PC cover
Mounting material SGCC wall mount plate
Networking interface (10) 10/100/1000 Base-T
Power method Universal input, 100–240V AC, Max. 4.4A, 50/60Hz
32–48V DC Lead Acid Battery, Max. 7.5A @32V
Power supply AC/DC, internal
Max. power consumption 240W
PoE interface (8) PoE (Pins 1, 2+; 3, 6-)
Voltage range PoE mode 44–57V DC
Total available PoE 60W
Max. PoE wattage per port 15.4W
LEDs System: white/blue
Output relays: steady white
Ethernet: flashing white
Button (1) Factory-reset
Digital input (8) Inputs for request-to-exit devices
(8) Inputs for door position sensors
(1) Emergency
Dry output relay (8) Lock terminals (12V or Dry)
(4) AUX terminals for advanced setup (Chime/Siren/Door opener)
Powered output relay Lock: 12V DC, 1A/ Dry
Aux: Dry only
Recommend max. cable length
  18 AWG
UACC-Cable-DoorLockRelay length
AWG length
AWG length
AWG length
100 m
(328 ft)
66 m
(217 ft)
42 m
(138 ft)
25 m
(82 ft)
46 m
(151 ft)
30 m
(98 ft)
20 m
(66 ft)
12 m
(29 ft)
80 m
(262 ft)
51 m
(167 ft)
32 m
(105 ft)
20 m
(66 ft)
Other locks
36 m
(118 ft)
24 m
(79 ft)
15 m
(49 ft)
9 m
(30 ft)
Operating environment Indoor use only
Ambient operating temperature 0 to 40° C (32 to 104° F) 
Ambient operating humidity 5 to 95% noncondensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level EAH-8, Ver 01
System Steady blue: adopted, device is ready
Steady white: pending adoption
Blinking white/blue: upgrading firmware
Breathing white: system initiating
Model # EAH-8
Barcode # 810084693117
Brand Ubiquiti
Shipping Weight 0.5000kg
Shipping Width 0.200m
Shipping Height 0.055m
Shipping Length 0.150m
Shipping Cubic 0.001650000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other UBNT Shop users shop smarter by writing reviews for products you have purchased.

Write a product review