Industrial Router CAT6 with WiFi/GPS/Bluetooth Cellular LTE Router Dual Sim Failover by Teltonika

 

Teltonika RUTX11 CAT6 router with wifi / gps / bluetooth is most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.

RUTX11 is the most feature rich among all the RUTX series devices. Wide range of internal hardware interfaces allows this device to be used in power hungry Industrial applications where speed and robustness is at the heart of solution.

4G (LTE) – Cat 6 DL up to 300 Mbps in sync with 4 x 1 Gbit Ethernet ports allows seamless data transfer experience. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition. Would that be a fine solution for Enterprise office of power hungry Digital signage with 8k HDTV solution? RUTX11 can handle it all.

In addition Bluetooth LE allows sensors to be connected directly to router, thus minimizing overall solution ecosystem.

  • Equipped with dual-sim, gigabit ethernet ports, dual-band ac wifi, bluetooth and more
  • Comes with all rutos software and security features
  • This device is perfect for advanced Industrial and enterprise applications
  • Convenient access via RMS remote management system
  • Strong and durable aluminium housing

 

 

Features:

  • Communication type: 4G/LTE, Wi-Fi, Bluetooth, LTE category, Cat.6 (300Mb/s Download, 50Mb/s Upload)
  • Maximum wireless transmission speed: 867 Mb/s.
  • Number of LAN ports: 4x 10/100/1000BaseTX (RJ45)
  • Operating frequency: 5 GHz, LTE,
  • Wireless network standards: IEEE 802.11ac Wave 2.
  • Antenna gain: Under 10dbi,
  • Dual SIM: Yes.
  • IP Rating: IP30,
  • LTE bands: B1 (2100MHz), B3 (1800MHz), B5 (850 MHz), B7 (2600MHz), B8 (900MHz), B20 (800MHz), B28 (700MHz), B32 (1500 MHz), B38 (2600MHz), B40 (2300MHz), B41 (2500 MHz),
  • RAM memory: 256MB,
  • Type of device power supply: Power supply, Passive PoE,
  • USB port: 1 x USB.

(RUTX11)

Router CAT6 with WiFi/GPS/Bluetooth Cellular LTE Router Dual Sim Failover

 

Pack Includes:

  • Router RUTX11
  • 18 W PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 2 x WiFi antennas (swivel, RP-SMA male)
  • 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
  • 1 x Bluetooth antenna (magnetic mount, RP-SMA male,
  • 1.5 m cable)
  • Ethernet cable (1.5 m)
  • SIM Adapter kit
  • QSG (Quick Start Guide)
  • Packaging box

Router CAT6 with WiFi/GPS/Bluetooth Cellular LTE Router Dual Sim Failover - Specifications

MOBILE

  • Mobile module

    4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

  • SIM switch

    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

  • Status

    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, Carrier aggregation

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

  • USSD

    Supports sending and reading Unstructured Supplementary Service Data messages

  • Black/White list

    Operator black/white list

  • Multiple PDN

    Possibility to use different PDNs for multiple network access and services

  • Band management

    Band lock, Used band status display

  • APN

    Auto APN

  • Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

  • Passthrough

    Router assigns its mobile WAN IP address to another device on LAN

WIRELESS

  • Wireless mode

    802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

  • WiFi security

    WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

  • SSID/ESSID

    ESSID stealth mode

  • WiFi users

    up to 150 simultaneous connections

  • Wireless Hotspot

    Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

BLUETOOTH

  • Bluetooth 4.0

    Bluetooth low energy (LE) for short range communication

ETHERNET

  • WAN

    1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

  • LAN

    3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

NETWORK

  • Routing

    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

  • Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

  • VoIP passthrough support

    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring

    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall

    Port forward, traffic rules, custom rules

  • DHCP

    Static and dynamic IP allocation, DHCP Relay, Relayd

  • QoS / Smart Queue Management (SQM)

    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS

    Supported >25 service providers, others can be configured manually

  • Network backup

    WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

  • Load balancing

    Balance Internet traffic over multiple WAN connections

  • Hotspot

    Internal/external Radius server, captive portal, built in customizable landing page

  • SSHFS

    Possibility to mount remote file system via SSH protocol

SECURITY

  • Authentication

    Pre-shared key, digital certificates, X.509 certificates

  • Firewall

    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

  • Attack prevention

    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

  • VLAN

    Port and tag based VLAN separation

  • Mobile quota control

    Custom data limits for both SIM cards

  • WEB filter

    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

  • Access control

    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN

    Multiple clients and a server can run simultaneously, 12 encryption methods

  • OpenVPN Encryption

    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

  • IPsec

    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

  • GRE

    GRE tunnel

  • PPTP, L2TP

    Client/Server instances can run simultaneously, L2TPv3 support

  • Stunnel

    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

  • DMVPN

    Method of building scalable IPsec VPNs

  • SSTP

    SSTP client instance support

  • ZeroTier

    ZeroTier VPN client support

  • WireGuard

    WireGuard VPN client and server support

MODBUS TCP SLAVE

  • ID range

    Respond to one ID in range [1;255] or any

  • Allow Remote Access

    Allow access through WAN

  • Custom registers

    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

  • Supported functions

    01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats

    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

  • Protocol

    HTTP(S), MQTT, Azure MQTT

MQTT GATEWAY

  • MQTT Gateway

    Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

  • Supported modes

    TCP Master, DNP3 Outstation

MONITORING & MANAGEMENT

  • WEB UI

    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

  • FOTA

    Firmware update from server, automatic notification

  • SSH

    SSH (v1, v2)

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET

  • Call

    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off

  • TR-069

    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

  • MQTT

    MQTT Broker, MQTT publisher

  • SNMP

    SNMP (v1, v2, v3), SNMP Trap

  • JSON-RPC

    Management API over HTTP/HTTPS

  • MODBUS

    MODBUS TCP status/control

  • RMS

    Teltonika Remote Management System (RMS)

IOT PLATFORMS

  • Cloud of Things

    Allows monitoring of: Device data, Mobile data, Network info, Availability

  • ThingWorx

    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

  • Cumulocity

    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub

    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPU

    Quad-core ARM Cortex A7, 717 MHz

  • RAM
     

    256 MB, DDR3

  • FLASH storage
     

    256 MB, SPI Flash
     

FIRMWARE / CONFIGURATION

  • WEB UI

    Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

  • FOTA

    Update FW

  • RMS

    Update FW/configuration for multiple devices at once

  • Keep settings

    Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating system

    RutOS (OpenWrt based Linux OS)

  • Supported languages

    Busybox shell, Lua, C, C++

  • Development tools

    SDK package with build environment provided

LOCATION TRACKING

  • GNSS

    GPS, GLONASS, BeiDou, Galileo and QZSS

  • Coordinates

    GNSS coordinates via WebUI, SMS, TAVL, RMS

  • NMEA

    NMEA 0183

  • NTRIP

    NTRIP protocol (Networked Transport of RTCM via Internet Protocol)

  • Server software

    Supported server software TAVL, RMS

  • Geofencing

    Configurable multiple geofence zones

USB

  • Data rate

    USB 2.0

  • Applications

    Samba share, USB-to-serial

  • External devices

    Possibility to connect external HDD, flash drive, additional modem, printer

  • Storage formats

    FAT, FAT32, NTFS

INPUT / OUTPUT

  • Input
     

    1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

  • Output
     

    1 x Digital Output, Open collector output, max output 30 V, 300 mA

  • Events

    Email, RMS, SMS

  • I/O juggler

    Allows to set certain I/O conditions to initiate event

POWER

  • Connector

    4-pin industrial DC power socket

  • Input voltage range
     

    9 - 50 VDC, reverse polarity protection, voltage surge/transient protection

  • PoE (passive)

    Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards

  • Power consumption
     

    16 W Max
     

PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)

  • Ethernet
     

    4 x RJ45 ports, 10/100/1000 Mbps

  • I/O’s
     

    1 x Digital Input, 1 x Digital Output on 4-pin power connector

  • Status LEDs
     

    4 x WAN type LEDs, 2 x Mobile connection type, 5 x Mobile connection strength, 8 x LAN status, 1 x Power, 2 x 2.4G and 5G WiFi

  • SIM
     

    2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

  • Power

    1 x 4 pin power connector

  • Antennas
     

    2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS

  • USB
     

    1 x USB A port for external devices, 1 x USB A port for external devices

  • Reset

    Reboot/User default reset/Factory reset button

  • Other
     

    1 x Grounding screw
     

PHYSICAL SPECIFICATION

  • Casing material
     

    Aluminium housing with DIN tail mounting option

  • Dimensions (W x H x D)
     

    115 x 44.2 x 95.1 mm

  • Weight
     

    456 g

  • Mounting options
     

    DIN rail, flat surface placement
     

OPERATING ENVIRONMENT

  • Operating temperature

    -40 °C to 75 °C

  • Operating humidity

    10% to 90% non-condensing

  • Ingress Protection Rating

    IP30

REGULATORY & TYPE APPROVALS

  • Regulatory
     

    CE/RED, RoHS, REACH

  • Vehicle
     

    ECE R10 (E-mark)
     

EMI IMMUNITY

  • ESD

    EN 61000-4-2:2009

  • RS

    EN 61000-4-3:2006 + A1:2008 + A2:2010

  • EFT

    EN 61000-4-4:2012

  • Surge protection
     

    EN 61000-4-5:2014

  • CS

    EN 61000-4-6:2009

  • DIP

    EN 61000-4-11:2004

  •  

RF

  • Standards
     

    ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.1.1
     

SAFETY

  • Standards
     

    IEC 62368-1:2014 (Second Edition) EN 62368-1:2014+A11:2017 EN 50385:2017 EN 62232:2017
     

Shipping Specifications

SKU RUTX11
Model # RUTX11
Barcode # 4.77903E+12
Brand Teltonika
Shipping Weight 0.4560kg
Shipping Width 0.176m
Shipping Height 0.062m
Shipping Length 0.358m
Shipping Cubic 0.003906496m3
Unit Of Measure ea

Be The First To Review This Product!

Help other UBNT Shop users shop smarter by writing reviews for products you have purchased.

Write a product review