Buy Wave AP 60GHz PtMP Access Point Wireless Radio 24dBI with 5.4Gbps 2.7Gbps Duplex Throughput

Wave AP 60GHz PtMP Access Point with 5GHz Backup 30 Degree Coverage powered by Wave Technology

The Ubiquiti Wave-AP Wave Access Point can connect up to 15 stations and deliver up to 5.4 Gbps total throughput (2.7 Gbps duplex). It is equipped with a high-performance 5 GHz backup radio to ensure uninterrupted connection, as well as a Bluetooth radio to simplify setup in the UISP® Mobile app.

Wave-AP Features:

60 GHz 5.4 Gbps max. throughput (2.7 Gbps duplex) main radio
30° sector coverage
5 GHz 800+ Mbps weather-resilient backup radio
(1) 2.5 GbE and (1) 10G SFP+ WAN ports
15 client capacity
— Wave Pro (8 km link range)
— Wave Long-Range (8 km link range)
— Wave Nano (5 km link range)
Integrated GPS & Bluetooth

(Wave-AP)

Wave AP 60 GHz PtMP Access Point

Package Includes

1 x Wave AP
1 x Mounting Bracket
1 x Allen Key
2 x Hex Bolts
2 x Washers
2 x Split Washers
2 x M8 Nuts
1 x Zip Tie
1 x 48V DC, 0.65A gigabit PoE adapter
1 x Power Cord
Quick Start Guide

Wave AP 60 GHz PtMP Access Point - Specifications

Mechanical
Dimensions	212 x 205 x 187 mm (8.3 x 8.1 x 7.4")
Weight	2.3 kg (5.1 lb)
Enclosure materials	Aluminum alloy, UV stabilized polycarbonate
Pole mount diameter	25 to 76 mm (1 to 3") on pipe outer diameter
Wind loading	98 N at 200 km/h (22 lbf at 125 mph)
Weatherproofing	IPX6
Hardware
Processor	Quad-core ARM® Cortex®-A53 at 1.4 GHz
Memory	DDR3L 512 MB
Networking interface	(1) 2.5GbE RJ45 port (100/1000/2500)* (1) 10G SFP+ port (1/10) * Active only when SFP+ port is down.
Max. power consumption	24W
Power method	Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) Passive PoE 2-pairs (4, 5+; 7, 8-), for 44–54V DC only
Power supply	48V DC, 0.65A 2.5GbE PoE adapter (included)
Supported voltage range	44–54V DC 22–27V DC
GPS	Yes
Button	Factory reset
LEDs	Power, Ethernet, GPS
Operating temperature	-40 to 60° C (-40 to 140° F)
Operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, CE
Software
Operating mode	PtMP access point
Ubiquiti specific features	Wave technology
Services	UISP, ping watchdog, NTP client, SNMP
Tools	Antenna alignment, discovery utility, ping, trace route, speed test
Network	Bridge mode
Application requirements	UISP: Version 1.5.7 and later
System
Total throughput	5.4 Gbps (2.7 Gbps duplex)
Supported clients count	15
Max. range	Connecting to a Wave Pro: up to 8 km Connecting to a Wave Long-Range: up to 8 km Connecting to a Wave Nano: up to 5 km Connecting to a Wave Pico: up to 1.3 km
Encryption	WPA2-PSK (AES)
RF
Operating frequency*	57–71 GHz *Depends on regulatory region.
Channel bandwidth	2160, 1080 MHz
Operating channels*	58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region.
Modulation	16QAM, QPSK
Antenna gain	24 dBi
Polarization	Vertically linear
Beamwidth	Azimuth: 3 dB 30° Elevation: 3 dB 3°
Electrical downtilt	0°
Back-Up RF
WiFi standard	802.11ax (WiFi 6)
Operating frequency* US/CA Worldwide	U-NII-1 5150 - 5250 MHz U-NII-2A 5250 - 5350 MHz U-NII-2C 5470 - 5725 MHz U-NII-3 5725 - 5850 MHz 5150 - 5875 MHz *Depends on regulatory region.
Channel bandwidth	20, 40, 80 MHz
Modulation	BPSK (1⁄2), QPSK (1⁄2), QPSK (3⁄4), 16QAM (1⁄2), 16QAM (3⁄4), 64QAM (2⁄3), 64QAM (3⁄4), 64QAM (5⁄6), 256QAM (3⁄4), 256QAM (5⁄6), 1024QAM (3⁄4), 1024QAM (5⁄6)
Antenna gain	12 dBi
Cross-pol isolation	10 dB
Polarization	Dual-linear
Beamwidth	Azimuth: 3 dB 35° Elevation: 3 dB 60°
Electric downtilt	0°
LEDs
Power	Flashing white: bootup in progress White: not connected to UISP application Blue: connected to UISP application Flashing blue: locate in progress Blue/white: firmware upgrade in progress
Ethernet	Flashing white: Ethernet traffic detected Flashing blue: SFP+ traffic detected
GPS	Blue: receiving at least (4) GPS satellite signal

SKU	Wave-AP
Model #	Wave-AP
Barcode #	810010078728
Brand	Ubiquiti
Shipping Weight	2.3000kg
Shipping Width	0.205m
Shipping Height	0.187m
Shipping Length	0.212m
Shipping Cubic	0.008127020m3
Unit Of Measure	ea