Cel-Fi GO Home & Office Mobile Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network.

 

Cel-Fi GO mobile repeater is a one box indoor coverage solution for Telstra's Next G® and 4GX networks operating on 3G 850Mhz or 4G 700/1800 bands. It is designed to dramatically boost voice quality and increase data speeds for in building applications.

The Cel-Fi GO offers a more flexible installation over other Cel-Fi models due to the ability to run cables to where the signal is needed most. By not having a wireless link between two boxes GO can operate in areas that are saturated with Wi-Fi.

Provides Coverage For Custom Application

Cel-Fi GO Stationary version is more fexible for advanced installations. It is ideal for high 5Ghz areas and those venues where you need a cabled solution to ensure great 3G/4G mobile reception. No longer will you need to move to a particular spot to be able to make and receive phone calls. Your Cel-Fi GO Stationary version can be confgured to improve the mobile coverage for many types of applications from dongas to caravans, small marine vessels to school demountables.

Cel-Fi GO protects the mobile network in several ways by:

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

 

Cel-Fi GO is covered by a 24 month warranty.

 

Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.

CEL-FI- GO Features:

  • A solution approved by Telstra and meeting ACMA regulations
  • Amplifies and disburses a Telstra 3G /HSPA/4G (LTE) mobile signal,boosting one frequency band at a time.
  • Provides manual selection of 3G/4G or utilise the auto band selection.
  • Once installed,Cel-Fi GO has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to100dB.
  • Provides a mobile coverage area of 900m2.
  • Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments.
  • Network-Safe protection that monitors mobile base stations in real time to ensure no interference with the normal function of the mobile network.
  • Uplink Muting Mode automatically shuts down uplink cellular transmissions when no active user equipment is detected.
  • Cel-Fi GO supports Bluetooth Connectivity or Micro USB connection to Nextivity’s Smartphone or PC WAVE App
  • Intuitive WAVE App allows quick and easy installation by a trained technician.
  • Designed for building applications
  • Bluetooth WAVE App for iPhone, Android & Computers

NOTES:
Cel-Fi GO will provide coverage for 20+ active users depending on the mobile network capacity in your area.
The 4G/LTE bands can only be utilised for data if both the smart phone and the local network support VoLTE. You will need to check your smart phone to conörm it has VoLTE functionality.

 

IMPORTANT: Your purchase of the Mobile Repeater requires an application to be completed. To complete the quick online application please click here 

Alternate CEL-Fi GO Home Office, Package Combinations:

  • LPDA +Wall Mount Panel Kit
  • LPDA + Ceiling Mount Dome Kit
  • Omni + Wall Mount Panel Kit
  • Omni + Ceiling Mount Dome

 

(RPR-CF-00)

CEL-FI GO Home & Office (LPDA + Wall), Directional Mobile Booster Kit.

 

Pack Includes:

  • Cel-Fi GO Stationary Model
  • LPDA Antenna Outdoor or Omni Antenna
  • 10m PT 240 cable
  • Indoor Wall Mount Panel Antenna or Indoor Dome Ceiling Mount Antenna
  • 6m PT 240 cable
  • CEL-FI GO Wave App

CEL-FI GO HOME & OFFICE, 3G/4G/4GX Mobile Repeater Kit- SPECIFICATIONS

 

CEL-FI GO - STATIONARY MODEL

Details
Manufacturer Nextivity
Output Power NA
Model Cel-Fi-Go Stationary
Antenna Port 2 x SMA Female
Frequency 3G 850MHz, 4G 700/1800MHz (boosts one band at a time)
Warranty 24 Months
Gain 100dB
   

Blackhawk Wideband LPDA Antenna 700-2700 MHZ, 11 - 12 DBI - SPECIFICATIONS

 

COMPATABILITY
Network Bandwidth Coverage Gain
Telstra 4GX 700 MHz Yes 11 dBi
Telstra Next-G 850 MHz Yes 11 dBi
Telstra 4G 1800 MHz Yes 12 dBi
Telstra 3G (Metro) 2100 MHz Yes 12 dBi
Telstra 4G (Metro) 2600 MHz Yes 12 dBi
Optus 4G+ 700 MHz Yes 11 dBi
Optus 3G 900 MHz Yes 11 dBi
Optus 4G 1800 MHz Yes 12 dBi
Optus 3G (Metro) 2100 MHz Yes 12 dBi
Optus 4G TDD 2300 MHz Yes 12 dBi
Optus 4G (Metro) 2600 MHz Yes 12 dBi
Vodafone 4G+ 850 MHz Yes 11 dBi
Vodafone 3G 900 MHz Yes 11 dBi
Vodafone 4G 1800 MHz Yes 12dBi
Vodafone 3G (Metro) 2100 MHz Yes 12 dBi
ELECTRICAL SPECIFICATIONS
Frequency Range 698-960 MHz / 1710-2700 MHz
Input Impedance 50 Ω
Peak Gain 11/ 12 dBi
VSWR ≤2.5:1 / ≤1.8:1
Polarisation Vertical linear
Horizontal Beamwidth 55 /42°
Vertical Beamwidth 46 /34°
Maximum Input Power 50 W
MECHANICAL SPECIFICATIONS
Input Connector N Female
Cable 30cm cable tail
Radiator Material Fully welded aluminium, black powder coat
Lightening Protection DC Ground
Mounting Stainless Steel, pole mount Ø30-50 mm
Wind Rating 192 km/h
Dimensions 1240 x 200 x 60mm
Packing Dimensions 1290 x 210 x 90mm
Weight 2.2kg
Operating Temperature -40 to +65°C

OMNI OUTDOOR WIDEBAND HIGH GAIN ANTENNA OUTDOOR, 6 DBI 700-2700MHZ - SPECIFICATIONS

COMPATABILITY
Telstra 4GX 700 MHz Yes 6 dBi
Telstra Next-G 850 MHz Yes 6 dBi
Telstra 4G 1800 MHz Yes 6 dBi
Telstra 3G (Metro) 2100 MHz Yes 6 dBi
Telstra 4G (Metro) 2600 MHz Yes 6 dBi
Optus 4G+ 700 MHz Yes 6 dBi
Optus 3G 900 MHz Yes 6 dBi
Optus 4G 1800 MHz Yes 6 dBi
Optus 3G (Metro) 2100 MHz Yes 6 dBi
Optus 4G TDD 2300 MHz Yes 6 dBi
Optus 4G (Metro) 2600 MHz Yes 6 dBi
Vodafone 4G+ 850 MHz Yes 6 dBi
Vodafone 3G 900 MHz Yes 6 dBi
Vodafone 4G 1800 MHz Yes 6 dBi
Vodafone 3G (Metro) 2100 MHz Yes 6 dBi
ELECTRICAL SPECIFICATIONS
Frequency Range 698-960 MHz / 1710-2700 MHz
Input Impedance 50 Ω
Peak Gain 6 / 6 dBi
VSWR ≤2.5:1 / ≤2.5:1
Polarisation Vertical linear
Horizontal Beamwidth 360° (omnidirectional)
Vertical Beamwidth 60°
Maximum Input Power 100 W
MECHANICAL SPECIFICATIONS
Input Connector N Female
Cable LMR240 5M SMA Male
Radiator Material Collinear copper elements
Radome Material UV stable PVC
Radome Color ABS plastic, white
Mounting Stainless Steel, pole mount Ø63-680 mm
Wind Rating 210 km/h
Dimensions Ø186 × 86 mm
Packing Dimensions 700 x 100 x 100mm
Weight 1.9kg
Operating Temperature -40 to +65°C

INDOOR DOME CEILING ANTENNA 2.5/3.5 dBi, 700-2700MHZ

COMPATABILITY
Network Bandwidth Coverage Gain
Telstra 4GX 700 MHz Yes 2.5 dBi
Telstra Next-G 850 MHz Yes 2.5 dBi
Telstra 4G 1800 MHz Yes 3.5 dBi
Telstra 3G (Metro) 2100 MHz Yes 3.5 dBi
Telstra 4G (Metro) 2600 MHz Yes 3.5 dBi
Optus 4G+ 700 MHz Yes 2.5 dBi
Optus 3G 900 MHz Yes 2.5 dBi
Optus 4G 1800 MHz Yes 3.5 dBi
Optus 3G (Metro) 2100 MHz Yes 3..5 dBi
Optus 4G TDD 2300 MHz Yes 3.5 dBi
Optus 4G (Metro) 2600 MHz Yes 3.5 dBi
Vodafone 4G+ 850 MHz Yes 2.5 dBi
Vodafone 3G 900 MHz Yes 2.5 dBi
Vodafone 4G 1800 MHz Yes 3.5dBi
Vodafone 3G (Metro) 2100 MHz Yes 3.5 dBi
ELECTRICAL SPECIFICATIONS
Frequency Range 698-960 MHz / 1710-2170 MHz
Input Impedance 50 Ω
Peak Gain 2.5 / 3.5 dBi
VSWR ≤2.0:1 / ≤1.8:1
Polarisation Vertical linear
Horizontal Beamwidth 360° (omnidirectional)
Vertical Beamwidth 90 / 55°
Maximum Input Power 50 W
MECHANICAL SPECIFICATIONS
Input Connector N Female
Cable 300mm
Radiator Material Brass, aluminium
Radome Material ABS plastic, white
Radome Color ABS plastic, white
Mounting Threaded bulkhead for ceiling
Dimensions Ø186 × 86 mm
Weight 0.25kg
Operating Temperature -40 to +65°C

WALL MOUNT PANEL ANTENNA INDOOR 7/8dBi, 700-2700MHZ - SPECIFICATIONS

ELECTRICAL SPECIFICATIONS
Model BH-WAL-698/2700-65
Frequency Range 698~960 MHz / 1710~2600MHz
Input impendance 50Ω
VSWR ≤1.5
Gain 7/8dBi
Polarisation Line polarization
E-plane beamwidth 65°
H-plane beamwidth 90 °
F/B ratio ≥23dB
Maximum Input Power 50 W
Lightning protection DC ground
Operating Temperature -40℃~+60℃
MECHANICAL SPECIFICATIONS
Connector Type N female
Cable Type RG58/U
Cable Length 300mm
Radome Material UV-Resistance ABS
Radome color White
Dimensions 210 × 180 x 44mm
Weight 0.600kg

SHIPPING SPECIFICATIONS

SKU RPR-CF-00
Model # RPR-CF
Brand CEL-FI
Shipping Weight 6.0000kg
Shipping Width 0.400m
Shipping Height 0.250m
Shipping Length 0.800m
Shipping Cubic 0.080000000m3

Be The First To Review This Product!

Help other UBNShop users shop smarter by writing reviews for products you have purchased.

Write a product review