Cel-Fi GO2 Vehicle Mobile Repeater has been tested, authorised and approved by Vodafone and Optus for use on the Mobile Network.

 

VODAFONE REGIONAL COVERAGE NOT SUPPORTED
GO2 for Vodafone will not boost the Vodafone Regional network. You can tell you’re using the Regional Network when ‘Vodafone AU R’ or ‘Voda R’ appears on your phone.

This is due to the Regional Network roaming on a partners network. More information can be found on Vodafone’s Regional Network page

The Cel-Fi GO2 Mobile repeater for Vehicles,  Cel-Fi GO2 Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal at the same time within your Vehicle including Cars, 4WD & Trucks. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.

Provides Coverage For Automotive Applications

Simply install Cel-Fi GO2 inside your vehicle and enjoy having great 3G and 4G mobile reception. No longer will you need to stop or drive to a particular spot to be able to make and receive phone calls.Your Cel-Fi GO2 can be configured to improve the mobile coverage for all types of vehicles from cars to trucks, to farm machinery and caravans,all with only a change in antenna.

 

Increases Mobile Data Speeds

Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO2 will amplify the available LTE or HSPA mobile signal and increase your data speeds dramatically. Email, internet, video and social networking speeds can achieve up to 4 x improvement. Note: The 4G/LTE bands can only be utilised for data (notcalls) unless both the smart phone and the local network support Voice over LTE(VoLTE).

Your Cel-Fi GO2 Mobile version can be configured to improve the mobile coverage for many types of applications from Cars4WD's to RV's or Motorhomes, Trucks, to small Marine Vessels.

Cel-Fi GO2 protects the mobile network in several ways by:

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.

 

Cel-Fi GO2 is covered by a 24 month warranty.

 

Important Note: Cel-Fi GO2 will boost a 3Gand 4G band at the same time (3G 850 and 4G 700 or 4G 1800).

CEL-FI- GO2 Features:

  • A solution approved by Mobile Carriers and meeting ACMA regulations
  • Amplifies and disburses a Telstra 3G /HSPA/4G (LTE) mobile signal, boosting both frequency band at the same time.
  • Once installed, Cel-Fi GO2 has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to 100dB.
  • Provides a mobile coverage around the vehicle area.
  • Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments.
  • Network-Safe protection that monitors mobile base stations in real time to ensure no interference with the normal function of the mobile network.
  • Cel-Fi GO2 supports Bluetooth Connectivity or Micro USB connection to Nextivity’s Smartphone or PC WAVE App
  • Intuitive WAVE App allows quick and easy installation by a trained technician.
  • Designed for automotive applications
  • Bluetooth WAVE App for iPhone, Android & Computers Click Here

NOTES:
Cel-Fi GO2 will provide coverage for 20+ active users depending on the mobile network capacity in your area.
The 4G/LTE bands can only be utilised for data if both the smart phone and the local network support VoLTE. You will need to check your smart phone to confirm it has VoLTE functionality.

Cel-Fi GO2 mobile version will not boost in areas where the signal is already very strong. If the signal is better than -80dBm (3G) or -95dBm (4G) the mobile GO version will cease to boost to ensure a degraded level of service is not experienced.

 

(RPR-CELFI-GO2)

Cel-Fi GO2 Mobile Repeater has been tested, authorised and approved by Vodafone and Optus - Nextivity

Pack Includes:

  • 1 x CelFi Go2 Mobile Repeater (Mobile or Stationary version)
  • 1 x Cigarette Power Adapter 12V 5M or 240V Power Adapter

 

*Note: Requires an Indoor and Outdoor Cellular antenna to be fully functional. Go to our Antennas category to select your preferred antenna combination or view our CelFi Go Kits.

Cel-Fi GO Vehicle Mobile Repeater has been tested, authorised and approved by Vodafone and Optus -SPECIFICATIONS

 

Cel-Fi GO - Mobile Model

Details  
Manufacturer Nextivity
Output Power NA
Model Cel-Fi-Go Mobile
Antenna Port 2 x SMA Female
Frequency 3G 850MHz, 4G 700/1800MHz (boosts one band at a time)
Warranty 24 Months
Gain 100dB
   

 

SKU RPR-CELFI-GO2
Model # RPR-CELFI-GO2
Brand CEL-FI
Shipping Weight 2.0000kg
Shipping Width 0.400m
Shipping Height 0.250m
Shipping Length 0.400m
Shipping Cubic 0.040000000m3
Unit Of Measure ea

Cel-Fi GO Vehicle Mobile Repeater has been tested, authorised and approved by Vodafone and Optus - DOCUMENTS

Be The First To Review This Product!

Help other UBNShop users shop smarter by writing reviews for products you have purchased.

Write a product review