Cel-Fi GO Mobile Booster Repeater for Caravans has been tested, authorised and approved by Telstra, Optus or Vodafone for use on the Mobile Network independently.


The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your Caravan, Motorhome or RV. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.

Provides Coverage For Automotive Applications

Simply install Cel-Fi GO inside your vehicle and enjoy having great 3G or 4G mobile reception. No longer will you need to stop or drive to a particular spot to be able to make and receive phone calls.Your Cel-Fi GO can be configured to improve the mobile coverage for all types of vehicles from cars to trucks, to farm machinery and caravans,all with only a change in antenna.


Increases Mobile Data Speeds

Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO will amplify the available LTE or HSPA mobile signal and increase your data speeds dramatically. Email, internet, video and social networking speeds can achieve up to 4 x improvement. Note: The 4G/LTE bands can only be utilised for data (notcalls) unless both the smart phone and the local network support Voice over LTE(VoLTE).

Your Cel-Fi GO Mobile version can be configured to improve the mobile coverage for many types of applications from 4WD to RV's or Motorhomes, Trucks, to small Marine Vessels.

Cel-Fi GO protects the mobile network in several ways by:

  • continuously monitoring power levels of the cell tower it is connected to and constantly adjusting the Cel-Fi's output power to suit.
  • only amplifying and disbursing a particular carrier’s mobile signal, operating within a set frequency band.
  • not interfering with the carrier’s network or other users on the network.
  • having a unique installation process to eliminate feedback into the mobile network.


Cel-Fi GO is covered by a 24 month warranty.




Important Note: Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.


CEL-FI- GO Features:

  • A solution approved by Telstra and meeting ACMA regulations
  • Amplifies and disburses a Telstra 3G /HSPA/4G (LTE) mobile signal,boosting one frequency band at a time.
  • Provides manual selection of 3G/4G or utilise the auto band selection.
  • Up to 1,500 m2 (15,000 ft2) of Coverage
  • Once installed,Cel-Fi GO has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to 100dB.
  • Provides a mobile coverage around the vehicle area.
  • Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments.
  • Network-Safe protection that monitors mobile base stations in real time to ensure no interference with the normal function of the mobile network.
  • Cel-Fi GO supports Bluetooth Connectivity or Micro USB connection to Nextivity’s Smartphone or PC WAVE App
  • Intuitive WAVE App allows quick and easy installation by a trained technician.
  • Designed for automotive applications
  • Bluetooth WAVE App for iPhone, Android & Computers Click Here

Cel-Fi GO will provide coverage for 20+ active users depending on the mobile network capacity in your area.
The 4G/LTE bands can only be utilised for data if both the smart phone and the local network support VoLTE. You will need to check your smart phone to conörm it has VoLTE functionality.

Cel-Fi GO mobile version will not boost in areas where the signal is already very strong. If the signal is better than -80dBm (3G) or -95dBm (4G) the mobile GO version will cease to boost to ensure a degraded level of service is not experienced.


Locate your nearest cellular tower - ACMA Proximity Map


Cel-Fi GO Mobile Repeater Kit for Caravans and RV's.


Pack Includes:

  • Cel-Fi GO Mobile Model
  • Cel-Fi Go Power Supply Options
    • Power Supply Adapter 240V (Sold Separately)
    • Cigarette Lighter Adapter 12V (Included)
    • Electrical Wire Red Black Copper Auto 2 Wire Low Voltage 12v DC x 10m (Sold Separately)
  • Choice of External Antenna
    • Marine Omni High Gain Antenna (698-2700 MHz, 7/10 dBi)
    • LPDA Yagi Antenna (698-3800 MHz, 9/11 dBi)
  • Choice of Indoor Antenna
    • ADHESIVE Mount Antenna 3G & 4G 3.5/3.5dBi, (700-2700 MHZ)
    • WALL MOUNT PANEL Antenna 7/8dBi, (698-2700 MHz, 10/11 dBi)
  • Choice of External Mounts
    • Antenna Mount Marine Adjustable "WET-SPOT" Stainless Steel
    • Antenna Mount Marine Adjustable "WET-SPOT" Nylon
  • 10m x PT240 cable
  • 6m x PT240 cable (included in kits that do not include the Marine Omni Antenna (RIPPA))

Cel-Fi GO Mobile Repeater Booster Kits for Caravans, Morohomes & RV's - SPECIFICATIONS



Manufacturer Nextivity
Output Power NA
Model Cel-Fi-Go Mobile
Antenna Port 2 x SMA Female
Frequency 3G 850MHz, 4G 700/1800MHz (boosts one band at a time)
Warranty 24 Months
Gain 100dB



Brand CEL-FI
Shipping Weight 6.0000kg
Shipping Width 0.400m
Shipping Height 0.400m
Shipping Length 0.800m
Shipping Cubic 0.128000000m3

Cel-Fi GO Mobile Repeater Booster Kits for Caravans, Morohomes & RV's - DOCUMENTS


Be The First To Review This Product!

Help other UBNShop users shop smarter by writing reviews for products you have purchased.

Write a product review